User's Manual

UTT Technologies Appendix B FAQ
http://www.uttglobal.com Page 403
Figure B-0-22 The HyperTerminal Window - Rescue
Step 6 Restart the Device; and during restarting, once the ³***booting with factory
default configuration
ˈ
please press Ctrl~C 3 times now
ʽ
***´ prompt appears,
please immediately press <Ctrl + C> keys three consecutive times within three
seconds. Then the appearance of ³
BREAK detected, skip restore user nvram
profile by _restoreUserNvramTask.
´ prompt means that the system has booted
into Rescue Mode successfully.