User's Manual

UTT Technologies Appendix B FAQ
http://www.uttglobal.com Page 395
Step 2 Click Start > Programs > Accessories > Communications > HyperTerminal,
the first screen that appears is the New Connection dialog box, see Figure
B-0-13; enter a name (Term115200 in this example) in the Name text box, and
then click OK button.
Note that if HyperTerminal is not installed, click
Start > Settings > Control
Panel > Add or Remove Programs > Add/Remove Windows Components >
Accessories and Utilities > Details >
Communications > Details, select the
HyperTerminal check box, and then click OK.
Figure B-0-13 New Connection - Term115200
Step 3 The Connect To dialog box appears, see Figure B-0-14. From the Connect
using drop-down list, select the COM port that links your PC to the Device
(COM3 in this example), and then click OK button.