User's Manual

UTT Technologies Appendix B FAQ
http://www.uttglobal.com Page 384
to the PPPoE connection, see Table B-0-1.
Call Syslog Call Result
Session Up [x]
PPPoE Up 00:0c:f8:f9:66:c6
Call Connected, on Line1, on Channel 0
Outgoing Call @51:1-1
PPPoE session has been established successfully.
Call Terminated @clearSession: 1
Outgoing Call @51:1-1
Failed to establish the physical connection, please check
whether the Internet connection is normal. You may use
Windows XP built-in PPPoE dial-in client to test.
Call Terminated @clearSession: 1
Call Connected, on Line1, on Channel 0
Outgoing Call @51:1-1
The physical connection has been established, but failed to
authenticate. Please go to the Basic > WAN page to check
whether the user name and password are correct. If they are
correct, please change the PPP Authentication to CHAP or
NONE (see Figure B-0-2) and then click the Save button,
lastly restart the Device.
Table B-0-1 PPPoE Dial-up System Logs