User's Manual

UTT Technologies Chapter 13 System
http://www.uttglobal.com Page 373
Figure 13-9 Restore Configuration
 Reset to Factory Defaults before Restore: If you select this check box, it will reset
the Device to factory default settings before importing the configuration file; else
import the file directly.
 Configuration File: Click the Browse button to choose an appropriate configuration
file or enter the file path and name in the text box.
¾ Restore: Click it to import the selected configuration file. It will overwrite the current
configuration on the Device with the new configuration.
Note
To avoid unexpected error, do not power off the Device during importing the
configuration file.
13.4.3 Restore Defaults
Figure 13-10 Restore Default
¾
Reset: Click it to reset the Device to factory default settings.
Note
1. This operation will clear all of the Device¶s custom settings. It is strongly
recommended that you backup the current configuration before resetting.
2. The default administrator user name is Default (case sensitive) with a blank
password. The default LAN interface IP address is 192.168.16.1, and subnet mask
is 255.255.255.0.