User's Manual

UTT Technologies Chapter 12 Security
http://www.uttglobal.com Page 360
12.8.2 Schedule Settings
Figure 12-34 Schedule Settings
 Schedule Name: It specifies a unique name of the schedule. It should be between 1
and 11 characters long.
 Start Date and End Date: They specify when the schedule begins and ends. If
exceed the specified range, the schedule will be of no effect. The date is in the range
of 1989-1-1 through 2050-12-31. If you want the schedule to be in effect for ever, set
both of Start Date and End Date to 1990-1-1.There are two methods to set them.
Ɣ Directly enter a date: You can directly enter a date in the Start Date or End
Date text box. The date should be entered in the format YYYY-MM-DD, for
example, 2011-03-23 (or 2011-3-23). Therein, YYYY indicates a four-digit year,
MM indicates a month of the year, and DD indicates a day of that month.
Ɣ Select a Date from the Drop-down Calendar: You also can select a date from
the drop-down calendar, see figure 12-34. Click the <Year and Year> to select
the year, click the <Month and Month> to select the month, and select a date
directly from the calendar.
 Period 1 to Period 8: They specify further constraints of active time within the
specified date range. It allows you to configure up to eight time periods for each
schedule.
 Days of the Week: It specifies the day(s) of the week on which the schedule is active.
The available options are Everyday, Monday, Tuesday « Sunday, Weekdays