User's Manual

UTT Technologies Chapter 12 Security
http://www.uttglobal.com Page 358
Step 1 Go to the Security > Service Group page, and then click the New button or
select the Service Group Settings tab to go to the setup page.
Step 2 Specify the Name of the service group.
Step 3 Select the type from the Service Type drop-down list.
Step 4 Add services to the group. There are two methods to add them.
1) Method One: Select the New radio button, add a new service as required,
and then click ==> to move the new service to the Service Members list
box. You can continue to add another services if needed.
2) Method Two: Select the Existing radio button, select one or more existing
services, and then click ==> to move the selected services to the Service
Members list box.
Step 5 Click the Save button to save the settings. You can view the service group in
the Service Group List.
Step 6 If you want to add another new service group, please repeat the above steps.
12.7.5 How to Edit an Service Group
If you want to modify a configured service group, do the following:
Step 1 Go to the Security > Service Group page.
Step 2 Click the Edit hyperlink of the group in the Service Group List to go to the
setup page.
Step 3 Modify the service members as required. There are two cases:
1) If you want to modify a user-defined service, select the service in the
Service Members list, click <== to move it from the Service Members list
to the left editable list box, and then modify it, lastly click ==> to move the
modified service to the Service Members list box again.
2) If you want to delete a service member, select the member in the Service
Members list box, and then click the Delete button.
Step 4 Click the Save button to save the changes to make them take effect.