User's Manual

UTT Technologies Chapter 12 Security
http://www.uttglobal.com Page 356
 New: Select it to add a new service to the group. For different Service Types, you
need configure different parameters.
 Existing: Select it to display the service groups that you have configured. If you
select General Service from the Service Type drop-down list, it will also display the
system predefined services here. The Device provides 38 predefined services.
 Service Members: It displays the members of the service group. A member may be a
user-defined service, predefined service or a service group.
¾ ==>: Click it to move the new user-defined service or selected existing service(s) to
the Service Members list box.
¾ <==: Click it to move the selected service member from the Service Members list
box to the left editable list.
¾ Delete: Click it to delete the selected service member from the Service Members list
box.
¾ Save: Click it to save the service group settings.
Note
1. A service group can contain up to ten service members.
2. The Name of a service group is case insensitive. For example, the service group test
or TEST is the same group. You must pay attention to it when creating a service
group.
3. If a service group (e.g., group A) has already included another service group (e.g.,
group B), then the service group A cannot be added to any other service group.