User's Manual

UTT Technologies Chapter 12 Security
http://www.uttglobal.com Page 351
1. The Name of an address group is case insensitive. For example, the address group
test or TEST is the same group. You must pay attention to it when creating an
address group.
2. If an address group (e.g., group A) has already included another address group (e.g.,
group B), then the address group A cannot be added to any other address group.
12.6.3 Address Group List
Figure 12-31 Address Group List
¾
Add an Address Group: If you want to add a new address group, click the New
button or select the Address Group Settings tab to go to the setup page, and then
configure it, lastly click the Save button.
¾ View Address Group(s): When you have configured some address groups, you can
view them in the Address Group List.
¾ Edit an Address Group: If you want to modify a configured address group, click its
Edit hyperlink, the related information will be displayed in the setup page. Then
modify it, and click the Save button.
¾ Delete Address Group(s): If you want to delete one or more address groups, select
the leftmost check boxes of them, and then click the Delete button.
Note
You cannot delete an address group which is referenced by the access control rule in