User's Manual

UTT Technologies Chapter 12 Security
http://www.uttglobal.com Page 317
12.2.2 IP/MAC Binding Settings
Figure 12-5 IP/MAC Binding Settings
¾
Scan: If you click the Scan button, the Device will immediately scan the LAN to
detect active hosts connected to the Device, learn and display dynamic ARP
information (that is, IP and MAC address pairs). Note that if you have added a LAN
host¶s IP and MAC address pair in the IP/MAC Binding List, this IP/MAC address
pair will not be displayed here.
¾ Bind: Click it to bind all the valid IP and MAC address pairs in the list box.
Also you can manually create one or more IP/MAC bindings, the operation is as
follows: Add one or more IP/MAC address pair entries in the list box, and then click
the Bind button. The input contents are: IP Address, MAC Address and Description,
one address pair entry per line; and the input format of an address pair entry is: IP
Address<Space>MAC Address<Space>Description<Enter>. Note that Description
is an optional parameter.