User's Manual

UTT Technologies Chapter 1 Product Overview
UTT Technologies http://www.uttglobal.com Page 18
4. Supports L2TP server and client
5. Supports PPTP server and client
6. The main features of IPSec are as follows:
Ɣ AutoIKE based on preshared key
Ɣ Manual key tunnel
Ɣ ESP and AH protocols
Ɣ DES, 3DES and AES 128/192/256 encryption algorithms
Ɣ MD5 and SHA-1 hash algorithms
Ɣ Diffie-Hellman group 1, 2 and 5
Ɣ Main mode and aggressive mode
Ɣ DPD (dead peer detection) and Anti-Replay
Ɣ Hub-spoke and mesh connections
Ɣ IPSec NAT traversal
Note
For detailed information about how to configure VPN features, please refer to the
related VPN configuration manual.
1.4 Physical Specification
1. Conforms to IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet standards
2. Supports TCP/IP, PPPoE, DHCP, ICMP, NAT, Static Route, RIPI/II, SNMP (MIB II),
etc.
3. Each physical port supports auto-negotiation for the speed and duplex mode
4. Each physical port supports auto-MDIX
5. Provides system and port LEDs
6. Operating Environment:
Ɣ Temperature: 32ºF to 104ºF (0ºC to 40ºC)
Ɣ Relative Humidity: 10% to 90%, Non-condensing
Ɣ Height: 0m to 4000m