User's Manual

UTT Technologies Chapter 11 Restriction
http://www.uttglobal.com Page 290
1. You cannot delete the system default PDBs.
2. By default, the Policy Database List only displays the system default PDBs, which
include CNC, TEL, QQ, MSN, BT, Thunder, GAMEURL, STOCKURL, FileType, and
upload. It allows you to customize firewall PDBs and modify the system default
firewall PDBs via CLI.
3. Only the system default PDBs can be updated. Once you have updated a firewall
PDB which has been referenced, the related settings will take effect immediately;
after you updated a route PDB which has been referenced, you should go to the
Advanced > Static Route page to reference it again and perform the save operation
to make the related settings take effect. Refer to section 7.1.2.4 How to Update a
System Default Static Route PDB for detailed operation.
11.3.3 Policy Database Version Check
Figure 11-7 Policy Database Version Check
 Policy Database Version Check: It specifies whether the Device will automatically
check the version of each PDB or not. There are two available options:
Ɣ Never: It indicates that the Device will not automatically check the version of
each PDB.
Ɣ Automatically: It indicates that the Device will automatically check the version of
each PDB at the specified time (set by Check Time); and log the results that
mainly contain which PDBs need to be updated in the Status > System Log
page.