User's Manual

UTT Technologies Chapter 10 QoS
http://www.uttglobal.com Page 274
the Min. Rx Bandwidth drop-down list, and select Mid from the Bandwidth
Priority drop-down list. Leave the default values for the other parameters. lastly
click the Save button.
Figure 10-10 Rate Limit Rule 2 Settings - Example Two
Step 6 Creating rate limit rule 3: Go to the QoS > Rate Limit Rule > Rate Limit Rule
Settings page (see Figure 10-11), select video from the Source Address
Group, select 2M from the Min. Tx Bandwidth drop-down list, select 4M from
the Min. Rx Bandwidth drop-down list, select High from the Bandwidth
Priority drop-down list. Leave the default values for the other parameters.
Lastly click the Save button.