User's Manual

UTT Technologies Chapter 10 QoS
http://www.uttglobal.com Page 273
3. Configuration Procedure
Step 1 Go to Security > Address Group page to create two address groups: One is
for the Video Area, and it contains the IP addresses from 192.168.16.2 to
192.168.16.40; the other is for the Online Game Area, and it contains the IP
addresses from 192.168.16.41 to 192.168.16.80; and here we assume their
names are video and game respectively.
Step 2 Go to the Basic > WAN > WAN1 page, enter 51200 in the Uplink Bandwidth
text box, and enter 102400 in the Downlink Bandwidth text box.
Step 3 Go to the QoS > Global Settings page, select the Enable Rate Limit check
box, and then enter 100 in the Capacity text box, lastly click the Save button to
save the settings.
Step 4 Creating rate limit rule 1: Go to the QoS > Rate Limit Rule > Rate Limit Rule
Settings page (see Figure 10-9), enter 256 in the Min. Tx Bandwidth text box,
and enter 512 in the Min. Rx Bandwidth text box. Leave the default values for
the other parameters. Lastly click the Save button.
Figure 10-9 Rate Limit Rule 1 Settings - Example Two
Step 5 Creating rate limit rule 2: Go to the QoS > Rate Limit Rule > Rate Limit Rule
Settings page (see Figure 10-10), select game from the Source Address
Group, select 1M from the Min. Tx Bandwidth drop-down list, select 2M from