User's Manual

UTT Technologies Chapter 10 QoS
http://www.uttglobal.com Page 271
Figure 10-7 Rate Limit Rule Settings - Example One
Step 4 Go to the QoS > P2P Rate Limit page (see Figure 10-8), select the Enable
P2P Rate Limit check box, and select 64K from the Max. Tx Rate drop-down
list, and select 128K from the Max. Rx Rate drop-down list. Leave the default
values for the other parameters. Lastly click the Save button.
Figure 10-8 P2P Rate Limit Settings - Example One