User's Manual

UTT Technologies Chapter 10 QoS
http://www.uttglobal.com Page 270
We need to do the following settings:
Ɣ Set the Internet connection¶s Uplink Bandwidth and Downlink Bandwidth to 10240
Kbit/s and 20480 Kbit/s respectively.
Ɣ Enable rate limit and set the Capacity to 100 in the QoS > Global Settings page.
Ɣ Create one rate limit rule to set guaranteed bandwidth for each LAN host: Min. Tx
Bandwidth is 100 Kbit/s, and Min. Rx Bandwidth is 200 Kbit/s.
Ɣ Enable P2P rate limit feature, and limit the P2P traffic rate for each LAN host: Max. Tx
Rate is 64 Kbit/s, Max. Rx Rate is 128 Kbit/s.
3. Configuration Procedure
Step 1 Go to the Basic > WAN > WAN1 page, enter 10240 in the Uplink Bandwidth
text box, and enter 20480 in the Downlink Bandwidth text box.
Step 2 Go to the QoS > Global Settings page (see Figure 10-6), select the Enable
Rate Limit check box, and then enter 100 in the Capacity text box, lastly click
the Save button.
Figure 10-6 Rate Limit Global Settings - Example One
Step 3 Go to QoS > Rate Limit Rule > Rate Limit Rule Settings page (see Figure
10-7), enter 100 in the Min. Tx Bandwidth text box, and enter 200 in the Min.
Rx Bandwidth text box. Leave the default values for the other parameters.
Lastly click the Save button.