User's Manual

UTT Technologies Chapter 9 PPPoE Server

http://www.uttglobal.com Page 247

Step 3 Go to the PPPoE > Global Settings > Internet Access Control page, select

the Only Allow PPPoE Users check box, and select CEO from the Exception

drop-down list. The CEO address group only includes one IP address:

192.168.16.2, which is configured in the Security > Address Group page.

Figure 9-15 Internet Control Settings - Example

Configuring PPPoE Accounts

Step 1 Go to the PPPoE > PPPoE Account > PPPoE Account Settings page.

Step 2 Creating the universal PPPoE Account whose user name is All. See the

following figure, enter All in the User Name, enter test in the Password, enter

universal account in the Description, enter 512 in the Tx Bandwidth and Rx

Bandwidth, and enter 90 in the Max. Sessions text box. Leave the default

values for the other parameters. Then click the Save button to save the settings.

Note that you should enable rate limit in the QoS > Global Settings page to

make rate limit for this PPPoE account take effect.