User's Manual

UTT Technologies Chapter 9 PPPoE Server
http://www.uttglobal.com Page 244
9.5 PPPoE Status
In the PPPoE > PPPoE Status page, you can view the status and usage information of
each online PPPoE dial-in user. If a PPPoE dial-in user has established the PPPoE
session to the Device successfully, you can view the assigned IP address, MAC address,
Rx Rate and Tx Rate of the user, online time and session ID of the PPPoE session.
Figure 9-13 PPPoE Status List
 User Name: It displays the PPPoE user name. The PPPoE dial-in user uses it to
dial-up and establish the PPPoE session to the Device.
 Status: It displays the PPPoE account status. If a PPPoE dial-in user has established
the PPPoE session to the Device successfully with the PPPoE account, it displays
Connected; Else, it displays Disconnected.
 IP Address: It displays the PPPoE dial-in user¶s IP address that is assigned by the
PPPoE server.
 MAC Address: It displays the PPPoE dial-in user¶s MAC address.
 Online Time: It displays the elapsed time since the PPPoE session was established
successfully.
 Rx Rate: It displays the real-time download rate (in kilobytes per second) of the
PPPoE dial-in user.
 Tx Rate: It displays the real-time upload rate (in kilobytes per second) of the PPPoE
dial-in user.
 Session ID: It displays the session ID of the PPPoE Session, which uniquely
identifies a PPPoE session.
¾ Disconnect: If you want to hang the established PPPoE session up manually, select
the leftmost check box of this PPPoE session, and then click the Disconnect button.
¾ Refresh: Click it to view the latest information in the list.