User's Manual

UTT Technologies Chapter 9 PPPoE Server
http://www.uttglobal.com Page 243
¾
Add a PPPoE IP/MAC Binding: If you want to add a new PPPoE IP/MAC binding,
click the New button or select the IP/MAC Binding Settings tab to go to the setup
page, and then configure it, lastly click the Save button.
¾ Edit a PPPoE IP/MAC Binding: If you want to modify a configured PPPoE IP/MAC
binding, click its Edit hyperlink, the related information will be displayed in the setup
page. Then modify it, and click the Save button.
¾ Delete PPPoE IP/MAC Binding(s): If you want to delete one or more PPPoE
IP/MAC bindings, select the leftmost check boxes of them, and then select Delete
from the drop-down list on the lower right corner of the IP/MAC Binding List, lastly
click OK.
¾ Delete All: If you want to delete all the PPPoE IP/MAC bindings at a time, select
Delete All from the drop-down list on the lower right corner of the list, and then click
OK. Then the PPPoE server will assign IP addresses to the dial-in users dynamically.