User's Manual

UTT Technologies Chapter 9 PPPoE Server
http://www.uttglobal.com Page 242
server will always assign this address to the PPPoE dial-in host specified by the MAC
Address. It must be a valid IP address in the range of address pool configured in the
PPPoE > Global Settings page.
 MAC Address: It specifies the MAC address of a PPPoE dial-in host.
 Description: It specifies the description of the PPPoE IP/MAC binding.
¾ Save: Click it to save the PPPoE IP/MAC binding settings.
Note
1. If you create an IP/MAC binding for a PPPoE dial-in user, the PPPoE server will
always assign the specified IP address to the user.
2. The PPPoE IP/MAC binding has higher priority than the PPPoE account/IP binding,
that is, if an IP/MAC binding and account/IP binding have the same IP address, the
Device will assign this IP address to the user that matches the IP/MAC binding. The
account/IP binding is configured in the PPPoE > PPPoE Account > PPPoE Account
Settings page.
9.4.2 PPPoE IP/MAC Binding List
When you have configured some PPPoE IP/MAC bindings, you can view them in the
PPPoE IP/MAC Binding List, and check whether a static IP address is assigned to the
specified host or not.
Figure 9-12 PPPoE IP/MAC Binding List