User's Manual
UTT Technologies Chapter 9 PPPoE Server
http://www.uttglobal.com Page 240
Figure 9-9 PPPoE Account Billing By Hour
ξ Accounting Mode: It specify the accounting mode of the PPPoE billing account.
Here select By Hour.
ξ Hours: It specify the max online time(by hour) of the PPPoE account. The device will
accumulate the online time of the PPPoE account, once the online time reaches the
max online time, the account cannot be used because itΒΆs been disabled by the UTT
device. 0 means no limit, the account will be always enabled.
Note
1. To ensure that PPPoE Account Billing operates properly, you should synchronize the
system clock in the System > Time page.
2. Before the PPPoE Account expires, if you have also set the PPPoE Account
Expiration Notice(refer to section 9.7 PPPoE Account Expiration Notice for more
information), the device will push a notice to the user. If the user decide to renew the
account(Accounting Mode is By Hour), the Administrator should set the Hours to a
new value.
9.3.4.4 PPPoE Account Billing By Traffic
If you want to create a PPPoE Billing Account by traffic, you can go to PPPoE > PPPoE
Account > PPPoE Account Settings page and set the Accounting Mode as By Traffic.
Figure 9-10 PPPoE Account Billing By Traffic
ξ Accounting Mode: It specify the accounting mode of the PPPoE billing account.
Here select By Traffic.