User's Manual

UTT Technologies Chapter 9 PPPoE Server
http://www.uttglobal.com Page 236
2. The PPPoE IP/MAC binding has higher priority than the PPPoE account/IP binding,
that is, if an IP/MAC binding and account/IP binding have the same IP address, the
Device will assign this IP address to the user that matches the IP/MAC binding. The
IP/MAC binding is configured in the PPPoE > PPPoE IP/MAC > IP/MAC Binding
Settings page.
3. The rate limit for a PPPoE account is in effect only when the Enable Rate Limit
check box is selected in the QoS > Global Settings page.
9.3.2 PPPoE Account List
When you have configured some PPPoE accounts, you can view their configuration in the
PPPoE Account List, including User Name, Enable, Tx Bandwidth, Rx Bandwidth,
Account/IP Binding, Accounting Mode, Max. Sessions, and Description.
Figure 9-5 PPPoE Account List
¾
Add a PPPoE Account: If you want to add a new PPPoE account, click the New
button or select the PPPoE Account Settings tab to go to the setup page, and then
configure it, lastly click the Save button.
¾ Enable a PPPoE Account: The Enable check box is used to enable or disable the
corresponding PPPoE account. The default value is selected, which means the
PPPoE account is in effect. If you want to disable the PPPoE account temporarily
instead of deleting it, please click it to remove the check mark.
¾ Edit a PPPoE Account: If you want to modify a configured PPPoE account, click its
Edit hyperlink, the related information will be displayed in the setup page. Then
modify it, and click the Save button.
¾ Delete PPPoE Account(s): If you want to delete one or more PPPoE accounts,