User's Manual

UTT Technologies Chapter 9 PPPoE Server
http://www.uttglobal.com Page 234
 User Name: It specifies a unique user name of the PPPoE account. It should be
between 1 and 31 characters long. The PPPoE server will use User Name and
Password to identify the PPPoE client.
 Password: It specifies the password of the PPPoE account.
 Description: It specifies the description of the PPPoE account.
¾ Advanced Options: Click it to view and configure advanced parameters. In most
cases, you need not configure them.
 Idle Timeout: It specifies how long the PPPoE session keeps connected since no
packets are transmitted through the PPPoE session. The Device will automatically
terminate the session after it has been inactive for the specified period of time. It
should be between 0 and 65535 seconds. The default value is zero, which means
that the Device will not terminate it.
 Session Timeout: It specifies how long the PPPoE session keeps connected since
established. The Device will automatically terminate the session after it has been
connected for the specified period of time. It should be between 0 and 65535 seconds.
The default value is zero, which means that the Device will not terminate it.
 Dialing Schedule: It specifies a schedule during which a PPPoE client can use the
current PPPoE account to dial up. If you select a schedule here, it will allow the
PPPoE client to dial up only in the selected schedule range. Else, the PPPoE client
can always dial up. The schedule is configured in the Security > Schedule page.
 Tx Bandwidth: It specifies the maximum upload bandwidth of a PPPoE dial-in user
that uses the current PPPoE account.
 Rx Bandwidth: It specifies the maximum download bandwidth of a PPPoE dial-in
user that uses the current PPPoE account.
 Accounting Mode: UTT Series support Account Billing of PPPoE Server. It offer
account billing based on different mode of By Date, By Hour and By Traffic.
Ɣ None: If you don¶t want to bill a PPPoE Account, please select this option. The
default value is None.
Ɣ By Date: Account will expire at the specified date. Refer to section 9.3.4 PPPoE
Account Billing for more information.
Ɣ By Hours: Account will expire after accumulative online time reaches the
specified hours. Refer to section 9.3.4 PPPoE Account Billing for more
information.
Ɣ By Traffic: Account will expire after accumulative upload or download traffic