User's Manual

UTT Technologies Chapter 8 NAT
http://www.uttglobal.com Page 227
The UPnP is enabled on the LAN interface by default.
8.4.2 UPnP Port Forwarding List
Figure 8-18 UPnP Port Forwarding List
 ID: It is used to identify each UPnP port forwarding rule in the list.
 Internal IP: It displays the IP address of the LAN host.
 Internal Port: It displays the service port provided by the LAN host.
 Protocol: It displays the transport protocol used by the service.
 Remote IP: It displays the IP address of the remote host.
 External Port: It displays the external port of the UPnP port forwarding, which is
opened for outside user to access.
 Description: It displays the description of the UPnP port forwarding rule.
¾ Delete: If you want to delete one or more UPnP port forwarding rules, select the
leftmost check boxes of them, and then click the Delete button.