User's Manual

UTT Technologies Chapter 8 NAT
http://www.uttglobal.com Page 203
 Description: It specifies the description of the port forwarding rule.
¾ Save: Click it to save the port forwarding rule settings.
Note
1. If you choose the Protocol as GRE, you should set the Start External Port and Start
Internal Port to 0, and set the Port Count to 1.
2. After you have enabled some features (such as, HTTP management in the System >
Remote Admin page), the system will automatically create some port forwarding
rules, which cannot be modified or deleted.
8.1.3 Port Forwarding List
Figure 8-2 Port Forwarding List
¾
Add a Port Forwarding Rule: If you want to add a new port forwarding rule, click the
New button or select the Port Forwarding Settings tab to go to the setup page, and
then configure it, lastly click the Save button.
¾ View Port Forwarding Rule(s): When you have configured some port forwarding
rules, you can view them in the Port Forwarding List.
¾ Edit a Port Forwarding Rule: If you want to modify a configured port forwarding rule,
click its Edit hyperlink, the related information will be displayed in the setup page.
Then modify it, and click the Save button.
¾ Delete Port Forwarding Rule(s): If you want to delete one or more port forwarding
rules, select the leftmost check boxes of them, and then click the Delete button.