User's Manual

UTT Technologies About This Manual
UTT Technologies http://www.uttglobal.com Page 6
0.4 Partial Factory Default Settings
1. The default administrator user name is Default (case sensitive) with a blank
password.
2. The following table provides the factory default settings of the interfaces.
Interface IP Address Subnet Mask
LAN 192.168.16.1 255.255.255.0
WAN1 192.168.17.1 255.255.255.0
WAN2/DMZ 192.168.18.1 255.255.255.0
Table 0-1 Factory Default Settings of Interfaces
0.5 Document Organization
This manual mainly describes the settings and applications of the UTT products, which is
organized as follows:
Chapter Contents
1 Product Overview
The functions and features of the Device.
2 Hardware Installation
How to install the Device.
3 Login to the Device
How to Login to the Device, including:
Ɣ Configure Your PC: How to install and configure TCP/IP
properties on your PC.
Ɣ Login to the Device: How to login to the Device; introduction to