User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 193
Figure 7-49 DHCP Address Pool Settings - Comprehensive Example (pool1)
Step 3 Enter 192.168.1.2 in the Start IP Address text box, enter 253 in the Number of
Addresses text box, enter 192.168.1.1 in the Default Gateway text box, enter
202.96.209.5 in the Primary DNS Server text box and enter 202.96.199.133 in
the Secondary DNS Server text box.
Step 4 Select ascii from the Relay Agent ID drop-down list and enter Test_Relay1 in
the associated text box. Leave the default values for the other parameters.
Step 5 Click the Save button to save the settings. Till now you have finished
configuring the pool1, and then you can view its configuration in the Address
Pool List.
c) Configuring the Other DHCP Address Pools (pool2 ~ pool10)
The other DHCP address pools¶ configuration procedures are very similar to that of the
Pool1. The difference is that each DHCP address pool has different Pool Name, Start IP
Address, Default Gateway and Relay Agent ID. Since the other DHCP address pools¶
configuration procedures are so similar to that of the poo1, the user is directed to review
the configuration procedure of the pool1.