User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 191
DHCP Server
DHCP Relay2
Internet
ĂĂ
Network Center
LAN: 200.200.200.254/24
DHCP Client
WAN:
200.200.200.2/24
192.168.1.0/24
DHCP Client
192.168.2.0/24
DHCP Client
192.168.10.0/24
WAN:
200.200.200.1/24
WAN:
200.200.200.10/24
Switch
DHCP Relay1
DHCP Relay10
Figure 7-47 Network Topology for DHCP Comprehensive Example
3. Configuration Procedure
As DHCP address pools have the similar configuration procedure, here we will take DHCP
address poo1 for example to describe how to configure the DHCP address pool.
As DHCP relay agents have the similar configuration procedure, here we will take DHCP
Relay1 for example to describe how to configure the DHCP relay agent.
1) Configuring DHCP server
a) Configuring DHCP Server Global Parameters
Step 1 Go to the Advanced > DHCP page, and then select the DHCP Server radio
button to go to the DHCP Server page.
Step 2 Select the Global Settings tab to go to the setup page.
Step 3 Select the Enable DHCP Server check box, see the following figure.