User's Manual

UTT Technologies Chapter 7 Advanced Setup

http://www.uttglobal.com Page 185

LAN

DHCP Server

DHCP Client

200.200.200.0/24

WAN Interface

Figure 7-42 Network Topology Where DHCP Client is Applied on WAN Interface

3. Configuration Procedure

Step 1 Go to the Advanced > DHCP page, select the DHCP Client radio button and

then select the DHCP Client Settings tab to go to the setup page, see the

following figure.

Figure 7-43 DHCP Client Settings - Example

Step 2 Select WAN from the Interface drop-down list.

Step 3 Select the Enable DHCP Client, Enable PnP and Allow AutoIP check boxes.

Step 4 Select hex from the Client ID drop-down list and enter 010022aa123456 in the

associated text box. Leave the default values for the other parameters.