User's Manual

UTT Technologies Chapter 7 Advanced Setup

http://www.uttglobal.com Page 183

Figure 7-40 DHCP Address Pool Settings - Example (pool2)

Step 3 Enter 192.168.16.102 in the Start IP Address text box, enter 153 in the

Number of Addresses text box, enter 192.168.16.1 in the Default Gateway

text box, enter 7200 in the Lease Time text box, enter 202.96.209.5 in the

Primary DNS Server text box, enter 202.96.199.133 in the Secondary DNS

Server text box, and enter utt.com.cn in the Domain Name text box. Leave

the default values for the other parameters.

Step 4 Click the Save button to save the settings. Till now you have finished

configuring the pool2, and then you can view its configuration in the Address

Pool List.

Configuring the DHCP Manual Binding

Step 1 Go to the Advanced > DHCP page, and then select the DHCP Server radio

button to go to the DHCP Server page.

Step 2 Select the Manual Binding Settings tab to go to the setup page, see the

following figure.