User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 178
Ɣ ascii: It is used to specify an ASCII character string. It should be between 1 and
27 characters long.
Ɣ ip: It is used to specify an IP address.
 Interface: It specifies the physical interface on which the DHCP raw option is applied.
¾ Save: Click it to save the DHCP raw option settings.
Note
For detailed information about DHCP options, see RFC 2132, with updates in RFC
3942.
7.8.6.2 Raw Option List
Figure 7-36 Raw Option List
¾
Add a Raw Option: If you want to add a new DHCP raw option, click the New button
or select the Raw Option Settings tab to go to the setup page, and then configure it,
lastly click the Save button.
¾ View Raw Option(s): When you have configured some DHCP raw options, you can
view them in the Raw Option List.
¾ Edit a Raw Option: If you want to modify a configured DHCP raw option, click its
Edit hyperlink, the related information will be displayed in the setup page. Then
modify it, and click the Save button.
¾ Delete Raw Option(s): If you want to delete one or more DHCP raw options, select