User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 177
7.8.6 Raw Option
Go to the Advanced > DHCP page firstly, and then select the Raw Option radio button
(see the following figure) to go to the Raw Option page, which includes the Raw Option
List and Raw Option Settings subpages.
Figure 7-34 Select Raw Option
7.8.6.1 Raw Option Settings
In this page, you can easily create DHCP raw options. Once a raw option is defined, the
DHCP server or client on the specified interface will add it into the options field of the
DHCP messages before sending them.
Figure 7-35 Raw Option Settings
 Option Name: It specifies a unique name of the raw option. It should be between 1
and 31 characters long.
 Option Code: It specifies the code of the raw option. It is used to uniquely identify the
option type. It should be a
number between 1 and 254.
 Option Value: It specifies the associated values of the raw option. There are three
types of formats.
Ɣ hex: It is used to specify a hexadecimal string. It should be between 1 and 25
characters long.