User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 171
needs to renew its address lease assignment with the server. The duration for a lease
determines when it will expire and how often the client needs to renew it with the
server. The default value is 3600 seconds.
 Primary DNS Server: It specifies the IP address of the primary DNS server that is
available to a DHCP client.
 Secondary DNS Server: It specifies the IP address of the secondary DNS server
that is available to a DHCP client.
 Primary WINS Server: It specifies the IP address of the primary NetBIOS WINS
server that is available to a Microsoft DHCP client.
 Secondary WINS Server: It specifies the IP address of the secondary NetBIOS
WINS server that is available to a Microsoft DHCP client.
 Domain Name: It specifies the DNS domain name for a DHCP client. This is usually
an organization name followed by a period and an extension that indicates the type of
organization, such as utt.com.cn. This domain name is appended to the local host
name to create the fully qualified domain name (FQDN) for the host. When querying
for a host name, the system will append this domain name to the host name for name
resolution, thus the DHCP client host who has a host name can access the network.
 DHCP Relay IP: It specifies the relay agent IP address for the DHCP address pool. It
can be a parameter used by address allocation policy. Refer to section 7.7.2.1.4 IP
Address Allocation Policy for details.
 Enable AutoIP: It allows you to enable or disable AuotIP. Select it to permit the
address obtained by a DHCP client through AutoIP to coexist with the address
assigned by a DHCP server.
 Response Mode: It specifies the mode in which DHCP server sends the DHCP
response messages to the client. The available options are Client Determine,
Unicast and Broadcast.
Ɣ Client Determine: It indicates that the DHCP server sends the DHCP response
messages in the mode required by the client.
Ɣ Unicast: It indicates that the DHCP server unicasts the DHCP response
messages to the client.
Ɣ Broadcast: It indicates that the DHCP server broadcasts the DHCP response
messages to the client.
 NetBIOS Node Type: It specifies the NetBIOS node type for Microsoft DHCP clients.
There are four NetBIOS nodes types, and each node type resolves NetBIOS names
differently.