User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 170
Figure 7-30 DHCP Address Pool Settings
 Interface: It specifies a physical interface to which the DHCP address pool is bound.
 Pool Name: It specifies a unique name for the DHCP address pool. It should be
between 1 and 11 characters long.
 Start IP Address: It specifies the starting IP address assigned from the DHCP
address pool.
 Number of Addresses: It specifies the maximum number of IP addresses that can
be assigned from the DHCP address pool. The addresses can be assigned
dynamically or manually by the DHCP server.
 Subnet Mask: It specifies the subnet mask of the IP addresses assigned from the
DHCP address pool.
 Default Gateway: It specifies the IP address of the default gateway for a DHCP
client.
 Lease Time: It specifies the length of time (in seconds) during which each IP address
assigned by a DHCP server is valid. If the lease expires, the client is automatically
assigned a new dynamic IP address. Before the lease expires, the client typically