User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 169
¾
Add a DHCP Address Pool: If you want to add a new DHCP address pool, select the
Address Pool Settings tab, and then configure it, lastly click the Save button.
¾ View DHCP Address Pool(s): When you have configured some DHCP address
pools, you can view them in the Address Pool List.
¾ Edit DHCP Address Pool: If you want to modify a configured DHCP address pool,
click its Edit hyperlink, the related information will be displayed in the setup page.
Then modify it, and click the Save button.
¾ Delete DHCP Address Pool(s): If you want to delete one or more DHCP address
pools, select the leftmost check boxes of them, and then click the Delete button.
7.8.4.6 DHCP Address Pool Settings
The DHCP server assigns an IP address to a requesting client from a DHCP address pool,
which also can be configured to provide other TCP/IP configuration parameters to the
client, such as the Gateway IP address, DNS Server and WINS Server addresses, lease
time, etc. The Device supports multiple address pools, so you can easily define multiple
subnets in LAN.
Before configuring a DHCP address pool, you should specify a physical interface to which
the pool is bound.