User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 168
7.8.4.4 How to Add the DHCP Manual Bindings
If you want to add one or more DHCP manual bindings, do the following:
Step 1 Go to the Advanced > DHCP page, and select the DHCP Server radio button
to go to the DHCP Server page.
Step 2 Select the Manual Binding Settings tab to go to the setup page.
Step 3 From the Bind to drop-down list, select a DHCP address pool to which this
DHCP manual binding belongs.
Step 4 Specify the User Name, IP Address and MAC Address as required.
Step 5 Specify the Client ID, Remote ID or Host Name if needed.
Step 6 Click the Save button to save the settings. You can view the DHCP manual
binding in the Manual Binding List.
Step 7 If you want to add another new DHCP manual binding, please repeat the above
steps.
Note
If you want to delete one or more DHCP manual bindings, select the leftmost check
boxes of them in the Manual Binding List, and then click the Delete button.
7.8.4.5 DHCP Address Pool List
Figure 7-29 DHCP Address Pool List