User's Manual

UTT Technologies About This Manual
UTT Technologies http://www.uttglobal.com Page 3
configured IP/MAC bindings and the maximum number of bindings supported by the
Device is 500.
: This drop-down list allows you to select the number of entries
displayed per page. In this example, the available options are 10, 30 and 50, and the
default value is 10.
: Click it to jump to the first page.
: Click it to jump to the previous page.
: Click it to jump to the next page.
: Click it to jump to the last page.
: Click it to add a new entry to the list. Here it will jump to the Security > IP/MAC
Binding > IP/MAC Binding Settings page, then you can add a new IP/MAC binding.
: Enter the text string you want to search for in this text box,
then press <Enter> key to display all the matched entries. What¶s more, you can do the
search within the displayed results. If you want to display all the entries, you only need
clear the text box and then press <Enter> key.
Note that the matching rule is substring matching, that is, it will search for and display
those entries that contain the specified text string.
: Click it to go to the corresponding setup page.
: Click it (add the check mark) to select all the entries in the current page.
Click it again (remove the check mark) to unselect all the entries in the current page.
: To delete one or more entries, select the leftmost check boxes
of them at first, and then select Delete from the drop-down list, lastly click OK to delete the
selected entries. To delete all the entries in the list, select Delete All from the drop-down
list at first, and then click OK.
0.3.1.2 Read-only List
A read-only list is used to display the system status information that is not editable. Let¶s
take the NAT Statistics list (see Figure 0-2) as an example to explain the functions.