User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 163
7.8.3.2 DHCP Client List
Figure 7-24 DHCP Client List
¾
Configure DHCP Client: If you want to apply DHCP client function on a physical
interface, select the DHCP Client Settings tab to go to the setup page, and then
select the interface and configure other parameters, lastly click the Save button.
¾ View DHCP Client Information: When you have configured DHCP client on one or
more physical interfaces, you can view the related configuration and status
information in the DHCP Client List.
¾ Edit DHCP Client: If you want to modify DHCP client applied on a physical interface,
click its Edit hyperlink, the related information will be displayed in the setup page.
Then modify it, and click the Save button.
¾ Release: If you want to release the current IP address of the DHCP client applied on
a physical interface, select its leftmost check box, and then click the Release button.
7.8.3.3 How to Configure DHCP Client
If you want to configure DHCP client, do the following:
Step 1 Go to the Advanced > DHCP page, select the DHCP Client radio button and
then select the DHCP Client Settings tab to go to the setup page.
Step 2 From the Interface drop-down list, select a physical interface on which the
DHCP client will be applied.
Step 3 Select the Enable DHCP Client check box to enable DHCP client on the
specified interface.