User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 141
Figure 7-15 SNMP Settings
 Enable SNMP: It allows you to enable or disable the SNMP agent. If you want to
enable the SNMP agent on the Device, please select this check box.
 Community Name: It specifies a community name to restrict access to the Device.
The SNMP community name is used as a shared secret for SNMP managers to
access the SNMP agent. The default value is uTt22aA. To ensure security, it is
recommended that you modify it to prevent intruder from using SNMP requests to get
the information from the Device.
 System Name: It specifies the host name of the Device.
 System Contact: It specifies the system contact information (such as a name or
phone number).
 System Location: It specifies the physical location information of the Device.
 Allowed SNMP NMSs: If you select this check box, you can specify up to three
SNMP network management stations (i.e., hosts), and only they can access and
manage the Device. Else, any host can use SNMP to manage the Device.
 Host 1 IP Address ~ Host 3 IP Address: They specify the IP addresses of the hosts
that can use SNMP to manage the Device.
¾ Save: Click it to save the SNMP settings.
Note