User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 140
2. Once plug and play is enabled, the Device will automatically enable proxy ARP,
enable DNS proxy, and disable IP spoofing defense.
3. Once plug and play is enabled, the Device will allow those non-IP/MAC binding users
to access the Device and Internet.
4. The users with the same IP address cannot access the Internet at the same time. For
example, if a LAN user with IP address 1.1.1.1 has connected to the Device to access
the Internet, another user with IP address 1.1.1.1 cannot access the Internet through
the Device.
5. A LAN user¶s IP address cannot be the same with the Device¶s LAN/WAN interface IP
address, gateway IP address, and primary/secondary DNS server IP address;
otherwise, the user cannot access the Device and Internet.
7.5 SNMP
This section describes the Advanced > SNMP page.
SNMP (Simple Network Management Protocol) is an application layer protocol for
collecting information about devices on the network. It is part of the TCP/IP protocol suite
which enables network administrators to monitor, configure, and troubleshoot the network
devices.
If you enable the SNMP agent on the Device, you can use the SNMP manager software to
monitor and manage the Device remotely. The Device supports SNMP v1/v2c and
Management Information Base II (MIBII) groups.
To ensure security, the SNMP manager can read the information about the Device but
can¶t change anything.