User's Manual

UTT Technologies Chapter 7 Advanced Setup
http://www.uttglobal.com Page 133
Note
PBR (Policy-based routing)
takes precedence over the Device¶s normal
destination-based routing. That is, if a packet matches all the criteria (source address,
destination address, protocol type, port, etc.) specified in a PBR
entry, it will be forwarded
through the
outbound interface specified in the PDB entry. If no match is found in the
PBR list, the packet will be forwarded through normal routing channel (in other words,
destination-based routing is performed).
7.2.2 Enable Policy-Based Routing
Figure 7-9 Enable Policy-Based Routing
 Enable Policy-based Routing: It allows you to enable or disable policy-based
routing. If you select the check box to enable policy-based routing, the configured
PBR entries will take effect. Else the PBR entries will be of no effect.
¾ Save: Click it to save your settings.
7.2.3 Policy-Based Routing List