User's Manual

UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 118
 Enable DNS Proxy: It allows you to enable or disable DNS proxy. If you want to
enable DNS proxy on the Device, please select this check box.
¾ Save: Click it to save the DHCP proxy settings.
Note
1. If the DNS proxy is enabled on the Device, in order to use DNS proxy service
normally, you need set the LAN hosts¶ primary DNS server to the Device¶s LAN IP
address. Note: If the DHCP server is also enabled on the Device, the Device will
assign its LAN IP address as the primary DNS server address to the LAN hosts
automatically.
2. To ensure that the DNS proxy works well, you should at least specify the primary
DNS server provided by your ISP on the Device. It is obvious that you can specify the
secondary DNS server if it is provided by your ISP.
3. The Device can act as a DNS proxy server to all LAN users; this greatly simplifies the
LAN hosts setup. For example, there is a LAN DNS proxy server on which a DNS
proxy software is installed (e.g., Wingate), and the LAN users take this server¶s IP
address as the primary DNS server address. Now, the Device will be used as a new
gateway for the LAN hosts. In this case, in order to use DNS proxy service normally,
the administrator only need change the Device¶s LAN IP address to the old proxy
DNS server¶s IP address, and enable DNS proxy on the Device, without modify the
LAN hostV¶ related settings.