User's Manual

UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 112
6.3.6 Load Balancing List
Figure 6-14 Load Balancing List
¾
Edit an Internet Connection: If you want to configure or modify the detection related
parameters and Weight of an Internet connection, click its Edit hyperlink, the related
information will be displayed in the Detection & Weight page. Then configure or
modify it, and click the Save button.
¾ View Load Balancing List: When you have configured load balancing global
parameters, and detection and weight settings for one or more Internet connections,
you can view the related configuration and status information in the Load Balancing
List.
¾ Refresh Load Balancing List: Click the Refresh button to view the latest
information in the list.
6.3.7 How to Configure Load Balancing
6.3.7.1 The Process of Configuring Load Balancing
Only after you have configured more than one Internet connections, the secondary menu
of Load Balancing will be displayed. The process of configuring load balancing is as
follows:
1. Go to the Basic > WAN page, configure the WAN1 Internet connection firstly, and
then configure other Internet connection(s) as required. Note that you also can
configure the WAN1 connection through the Quick Wizard.
2. Go to the Basic > Load Balancing page, click the Edit hyperlink of an Internet
connection in the Load Balancing List to go to the Detection & Weight page to