User's Manual

UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 111
Figure 6-13 Detection and Weight Settings
 Detection Target IP: It indicates the IP address of a detection target device. The
Device will monitor an Internet connection by sending the detection packets to the
detection target IP address. If you select Gateway IP Address from the drop-down
list, the Device will send the detection packets to the selected Internet connection¶s
default gateway; If you select Other IP Address from the drop-down list, you need
enter an appropriate public IP address in the associated text box, then the Device will
send the detection packet to this IP address.
 Detection Interval: It specifies the time interval at which the Device periodically
sends detection packets, one packet at a time. The default value is 1000 milliseconds.
It should be between 1000 and 60000 milliseconds, or 0; and 0 means that
connection detection is disabled on the selected Internet connection.
 Retry Times: It specifies the number of retries per detection period. The default value
is 3.
 Weight: It specifies the weight of the selected Internet connection. Refer to section
6.3.2.1 Allocating Traffic according to Connection Bandwidth for more
information about how to set it.
¾ Save: Click it to save the detection and weight settings of the selected Internet
connection.
Note
The Detection Target IP, Detection Interval, and Retry Times are connection
detection related parameters. For more information about them, please refer to
section 6.3.1.1 Internet Connection Detection Mechanism.