User's Manual

UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 108
6.3.4 Load Balancing Global Settings
The following sections describe the global settings related to Full Load Balancing and
Partial Load Balancing respectively. For more information about them, please refer to
section 6.3.1.2 Load Balancing Mode.
6.3.4.1 Global Settings - Full Load Balancing
Figure 6-11 Global Settings - Full Load Balancing
 Detection Method: It specifies the detection method which is used to monitor
Internet connections. The Device provides three detection methods: ICMP, ARP and
DNS. For more information about them, please refer to section 6.3.1.3 Internet
Connection Detection Method.
Ɣ ICMP: The Device will monitor an Internet connection by sending ICMP echo
request packets the target IP address you specify. In this case, the target IP
address can be either the connection¶s default gateway IP address or another
public IP address you specify.
Ɣ ARP: The Device will monitor an Internet connection by sending ARP request
packets to the connection¶s default gateway IP address.
Ɣ DNS: The Device will monitor an Internet connection by sending DNS query
packets to the public DNS server IP address you specify.
 Load Balancing Policy: It specifies the policy which is used to control and balance
the traffic among multiple Internet connections. The available options are IP Address