User's Manual
UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 97
Primary DNS Server: It specifies WKH,3DGGUHVVRI\RXU,63¶VSULPDU\'16server.
Secondary DNS Server: It specifies the IP address of your ISP¶s secondary DNS
server. If it is available, you may set it. Else, please leave it blank.
¾ Advanced Options: Click it to view and configure advanced parameters. In most
cases, you need not configure them.
MAC Address: It specifies the MAC address of the WAN interface. In most cases,
please leave the default value.
Proxy ARP: It allows you to enable or disable proxy ARP on the WAN interface. The
available options are Disabled, Enabled and Nat.
Ɣ Disabled: Select it to disable the proxy ARP on the WAN interface.
Ɣ Enabled: Select it to enable the proxy ARP on the WAN interface.
Ɣ Nat: Select it to enable the NAT proxy ARP the WAN interface.
Mode: It specifies the speed and duplex mode of the WAN interface. The Device
supports five or six modes (Note that only the gigabit WAN interface supports
1000M-HD), which include Auto (Auto-negotiation), 100M-FD (100M Full-Duplex),
100M-HD (100M Half-Duplex), 10M-FD (10M Full-Duplex), and 10M-HD (10M
Half-Duplex) , 1000M-FD (1000M Full-Duplex). In most cases, please leave the
default value. If a compatibility problem occurred, or the network device connected to
the WAN interface doesn¶t support auto-negotiation function, you may modify it as
required.
Gateway Binding Mode: It determines whether the gateway¶s IP and MAC address
pair will be bound or not. If you want to bind the gateway¶s IP and MAC address pair
to protect the Device against external ARP spoofing, select Manual from this
drop-down list, and enter the gateway¶s MAC address in the Gateway MAC Address
text box. Else, select None.
¾ Save: Click it to save the static IP Internet connection settings.
Note
The WAN interface IP address and default gateway IP address should be on the
same subnet. If they are not, please modify the Subnet Mask to make them be on the
same subnet. If you don¶t have the subnet related knowledge, please ask a
professional or UTT customer engineer for help.