User's Manual

UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 96
6.2.2.2 Static IP Internet Connection Settings
If you are required to use a static IP address, please select Static IP from the Connection
Type drop-down list. Then the following page will be showed.
Figure 6-6 Static IP Internet Connection Settings
 Connection Type: It specifies the type of the Internet connection. Here please select
Static IP.
 Uplink Bandwidth: It specifies the uplink bandwidth of the Internet connection, which
is provided by your ISP. You may ask the ISP about the uplink bandwidth.
 Downlink Bandwidth: It specifies the downlink bandwidth of the Internet connection,
which is provided by your ISP. You may ask the ISP about the downlink bandwidth.
 ISP: It specifies the Internet service provider by which the Internet connection is
provided.
 IP Address: It specifies the IP address of the WAN interface, which is provided by
your ISP.
 Subnet Mask: It specifies the subnet mask of the WAN interface, which is provided
by your ISP.
 Default Gateway: It specifies the IP address of the default gateway, which is
provided by your ISP.