User's Manual

UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 87
Status Description
Closed The physical interface isn¶t connected, or doesn¶t dial up yet.
Dialing Start dialing up, but not receive response yet.
Authenticating Server responded and is authenticating.
Connected
Authentication succeeded, and the connection is established and
ready for data transmission.
Disconnecting The PPPoE session is disconnecting.
Hang up Either peer has hanged up.
Disconnected The PPPoE session has terminated, waiting for dialing up.
Internal Error Undefined status.
Table 6-1 Description of PPPoE Connection Status
2. Static IP Connection Status
There are three kinds of status for Static IP connection (see Table 6-2).
Status Description
Closed The physical interface isn¶t connected.