User's Manual

UTT Technologies Chapter 6 Basic Setup
http://www.uttglobal.com Page 86
6.2 WAN Settings
6.2.1 WAN List
After you have configured the Internet connection through the Quick Wizard, you can
view its configuration and status in the Basic > WAN > WAN List page; also you can
modify or delete it if needed.
Figure 6-2 WAN Internet Connection List
Note
If you want to use multiple connections to access the Internet, please configure them
in this page, and then go to the Basic > Load Balancing page to configure load
balancing and failover.
6.2.1.1 Parameter Definitions
 Type: It displays the connection type. For the PPPoE Internet connection, it will also
display its user name and dial mode.
 Status: It displays current status of the connection. We will describe the status of
each connection status respectively.
1. PPPoE Connection Status
There are eight kinds of status for PPPoE connection (see Table 6-1). When it is
connected, it will also display the elapsed time (days: hours: minutes: seconds) since
connected.