User's Guide

These limits are designed to provide reasonable protection against harmful interference in a
residential installation.This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different.
from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Login via admin IP
The default administrative IP address of the device is "192.168.100.1", the user name is "root"
and the password is "admin". Open your browser and enter the default user name and
password to login.
Inside the administration interface, under the “System⸺Administration”page, change the
administrator login password.
Login Management Interface
Change administrator password
The default SSID for this device is 2.4G-XXXXXX ( XXXXXX is the last six digits of the device MAC)
and the default password is 4grouterwifi.
Change the default administrative IP address and IP
address pool settings
“Network⸺Interfaces⸺LAN”, The default administrative address and the range of
DHCP-assigned address pools can be modified.
Change WiFi-related settings
“Network⸺wireless”, click on the "Edit" button to enter the configuration page.
“Interface Configuration⸺General Setup”, modify the ESSID configuration to change the
SSID of the WiFi, on “Wireless Security” page to change the security related settings, such as
the WiF key.
Change 4G and WAN load balance configuration
The TR100G router supports load balance and backup between 4G and WAN,and when both
4G and wired WAN connections are available, the configured policy determines which channel
is used to access the internet. The default configuration is to prefer use of wired WAN, where
the metric of WAN configured is less than 4G’s metric.
If 4G access is required as a priority, you need to click "Edit" in the following configuration
interface and change the number of 4G‘s metirc to be less than the number of WAN‘s metric.
For example, the number of 4G’s metric is set to 10 and the number of WAN‘s metric is set to
20.
FCC Warning
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
① this device may not cause harmful interference, and ② this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This smart phone meets the government's requirements for exposure to radio waves. The
guidelines are based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of all persons regardless of
age or health.
This cquipment should be installed and operated with minimum distance of 0mm the radiator
your body. The body-worn test distance is 0mm.
Notes: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
Notes: This device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter.
Frequently Asked Questions
What is the address and default admin password of the web administration
page?
The management IP address is 192.168.100.1, and the default username is “root”, password is
“admin”.
Note: Once the configuration changes have been made, you need to click on the "Save and Apply"
button to have the changes saved and take effect.
What should I do if I forget my router management password?
The default password for the router is “admin”, please try using the default password to log
in. If you cannot login with the default password, please restore the factory settings and then
login with the default password.
How do I restore my router to its factory settings?
When the system is running normally, press and hold the “Reset” button on the router with a
pointed object for about 8 seconds or more and wait for the device to finish rebooting.
Ports and keys Indicators
Power port connect with power adapter
DC
Reset the whole wireless routerReset key
Reset
Connect with WAN device,
such as ADSL modem,
Optical router etc.
WAN portWAN
Connect with LAN devices,
such as PC, printer etc.
LAN port
LAN
Product Overview
The TR100G 4G Wireless Router supports Cloud SIM technology, eliminating the need to install
a physical SIM card, making it plug-and-play for a convenient user experience.
The TR100G supports multiple operators' 4G networks , and automatically choose the best
network depending on the wireless environment , providing optimal coverage.
Always on when powered on
always on when 4G connection
works normal
Blinking when LAN1-LAN4 has
data transmission
Blinking when WAN has data
transmission
Blinking when WiFi has data
transmission
1 2 3 4 5 6 7
TR100G 4G Wireless Router
User Guide
SIM
（2FF，mini SIM）
POWER
LIGHT
LAN1WiFi
4G
WAN
LAN3
LAN4 LAN3 LAN2 LAN1 POWERRESETWAN
LAN2 LAN4
Front view
Back view
Features
Black
109mmⅹ83mmⅹ29mm
0.54Kg
AC: 100V~240V,50Hz~60Hz DC: 12V/1A
4 100M LAN口，1*100M WAN
External antenna（WiFi & wireless）
802.11b/g/n 2.4G,
32
Colour
Size
Weight
Power
LAN/WAN interface
Antenna
WiFi
WIFI Max users
Support
network type
（TR100G）
TM22G
4G and wired Wan
mutual backup
Description
Product specifications
Note：
The above peak rate are theoretical values, actual speed rate are subject to local network
environment and operator network coverage.
FDD LTE： B1/B2/B3/B4/B5/B7/B8/B9/B12 /B13/B17/
B18/B19/B20/B25/B26/B28/B66
TDD LTE: B34/B38/B39/B40/B41
3G： B1/B2/B4/B5/B8
2G： B2/B3/B5/B8
Support the mutual backup function between 4G and
wired Wan
CAT 4: DL 150Mbps UL 50MbpsPeak rate