User's Manual

Specification:
Model
Functions
REX2-i
REX2-s
Functional Specification
Request to Exit indication
Color changes from Blue to Green with a beep
Request to Exit output
Dry contact output for 1 seconds (NC/NO selectable)
RTE Output (dry contact)
NC/NO jumper selectable rated @ 30Vdc; 1A
Mechanical Override
Available for all models
Tamper protection
Available for all models
Remote Button (Optional)
433.896MHz
(Max supports 5 remote buttons at the same time.)
Alarm Output
Dry contact output follow the Fire input (NC/NO selectable)
Door Held Open
Indication icon
The icon will change to blue and beep every 5 seconds
Door Held Open
High/Low level input
jumper
High/Low level input jumper selectable
Buzzer for DHO and RTE
activate
Jumper enable/disable
Main Power failure
Indicator
Mains failure dry contact output from Power Supply.
The icon will change to orange when activated
Fire Alarm Indicator
The icon will change to red and siren will activated
Fire Alarm Input
When trigger, back lit will flash in Red the siren will
activate
When trigger, the lock will release and back
lit will flash in Red & siren will activate
Speaker
Equipped for Door Chimer and Siren
“Break Glass” function
N/A
Hit hard at the center
Dimension
118.2 (L) X 74.2 (W) X 8.5 (H) mm (above surface)
Technical Specifications
Typical Read range
~3 to 4cm
Electric Lock bypass relay
N/A
30Vdc; 2A (max)
Electric Box
Requirement
Please make sure the gang box is similar to the diagram as display.
Weight
157g
Operating Specification:
Operating Voltage
9 - 15VDC
Case material
PC+ABS
Operating Current
150mA (max @ 12Vdc)
Standard Color
Black & White
Operating Temperature
-20℃-60℃
Operating Humidity
10% - 90%